3.11 Sample selection (click to enlarge)	3.12 Measurement (length) (click to enlarge)	3.12 Measurement (cross length) (click to enlarge)
3.12 Measurement (thickness) (click to enlarge)	3.12 Measurement (width) (click to enlarge)	3.13 Moisture content    (click to enlarge)
3.14 Visual and feeling inspection (click to enlarge)	3.15 Marking Panels (click to enlarge)	3.15 Marking Panels    (click to enlarge)
3.16 Sample selection for glue adherence test (click to enlarge)	3.17 Placing samples into boiler (click to enlarge)	3.18 High-pressure boiling    for 4 hours    (click to enlarge)
3.19 Placing samples into the kiln drier (click to enlarge)	3.20 Kiln- drying for 4 hours (click to enlarge)	3.21 Inspecting samples after completion of the glue adherence test (click to enlarge)
3.22 Inspection report (click to enlarge)

1. Inspection Standard

Our inspections abide by the Single Sampling Plans for Normal Inspection (SSPNI).

2. Tools

2.1 Measuring tape
2.2 Moisture meter
2.3 Vernier caliper
2.4 Lab equipment
2.5 Pen, inspection forms, digital camera
2.6 Boiler
2.7 Kiln Drier

3. Inspection Procedures

3.1 Shuttering Panels

3.11 Sample selection
3.12 Measurement (length, width, thickness and cross length)
3.13 Moisture content
3.14 Visual and feeling inspection
3.15 Marking Panels
3.16 Sample selection for glue adherence test
3.17 Placing samples into boiler
3.18 High-pressure boiling for 4 hours
3.19 Placing samples into the kiln drier
3.20 Kiln- drying for 4 hours
3.21 Inspecting samples after completion of the glue adherence test
3.22 Inspection report
3.23 Determine the adequacy of the products to the quality required